PLA

PLA (Poly-Lactic Acid) is a biopolymer obtained from the processing of starch extracted from some plants, is therefore obtained from renewable and biodegradable resources.
Brilliant colors, ease of printing, dimensional accuracy, absence of odors and low environmental impact make it the preferred material for most projects.
PLA

ABS

ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic polymer widely used in industry.
It stands out for its high mechanical strength and increased intra-layer adhesion.
We recommend the use in closed chamber with AURA and PRIMA printers in order to avoid thermal shock of the piece in the cooling phase.
 
ABS

HIPS

HIPS (High Impact PolyStyrene) is an impact-resistant polystyrene with high resistance to shocks and heat.
It has exceptional characteristics regarding hygiene and printing in a truly fluid way with a matt surface finish.
Parts printed with HIPS are very light and can be easily glued with a variety of adhesives.
It is used as a support material for complex geometries, as it is soluble in limonene.
We recommend the use in closed chamber with our AURA and PRIMA printers in order to avoid abrupt cooling of the piece in the cooling phase.
HIPS

WOOD FIBER

WOOD is a PLA-based filament filled with wood fiber.
The objects printed with this filament look very similar to the wood, the smell and the sensation to the touch refer to the natural fiber.
It is possible to post-produce any object printed with this filament by smoothing the surface bringing out wood grains.
WOOD

CORK

CORK is a PLA-based filament filled with natural cork fibers, that make this filament light and impact resistant.
The high concentration of cork fibers allows you to print objects with excellent aesthetics and properties similar to cork.
CORK

PETG

PETG is a polyethylene terephthalate copolyester. It is an extremely resistant material that allows to obtain prints with a high intralayer adhesion.
The almost total absence of warping makes this material excellent for prints with large flat surfaces.
Available in a wide range of colors from clear to opaque.
PETG

XTITAN

XTITAN is a very resistant material with very high printing precision, so it is recommended for technical, mechanical and engineering applications.
It is an evolution of traditional ABS but easier to print and guarantees perfect intra-layer adhesion.
XTITAN

THERMO MAGIC

THERMO MAGIC is a special PLA (polylactic acid) that changes color according to the temperature: above 29 ° C, from anthracite gray it becomes lighter.
The ideal filament to print objects that detect the temperature.
THERMO MAGIC

STONE

STONE is a PLA-based filament filled with stone powder.
It is easy to print and has good adhesion to the heated bed without any fixative spray.
The final surface, printed with this filament is opaque and similar to the stone, with different shades like natural material.
STONE

METAL

METAL is a PLA-based with 80% of gravimetric metal filling.
Printed objects are very easy to post-process and have realistic effects similar to the metals contained.
METAL

CARBON

CARBON is a PETG-based filament, improved and reinforced with ultra-light carbon fibers.
The filament has excellent impact resistance and is stiffer than traditional PETG.
CARBON